Epson V13H010L68 ELPLP68
Compare pricesfrom 3+ offers
- CURRENT PRICE $91.34
- LOWEST PRICE $91.34
- HIGHEST PRICE $94.34
Epson V13H010L68 ELPLP68 Review
The Epson V13H010L68 ELPLP68 as an ultra-high efficiency (UHE) projector lamp is designed to replace the original genuine Epson projector lamp included with the Epson PowerLite Home Cinema 3010/3010e-projectors. The PowerLite Home cinema 3010e with WirelessHD brings the power of 3D right to your living room. You may have an experience of immersing yourself in eye-popping 3D adventures with 2200 lumens of color brightness (color light output) and 2200 lumens of white brightness (white light output).
The Lamp life works on the normal length of about 4000 hour and 5000 hour in an economy mode. LCD is its compatible device. All Epson projectors are based on 3-chip LCD technology for amazing color, incredible detail and solid reliability. 3LCD’s 3-chip architecture dedicates an entire chip to process each primary color-red, green and blue continuously. Unlike single-chip technology that delivers color sequentially, you get-fulltime color. The result is vibrant, realistic images and video all delivered with 3LCD’s true-to-life color.
A projector’s lamp is its most important component and the one which has the most direct effect on its image quality. It is also the most consumable item of a projector. Most users of this type of Epson’s projector lamp should be able to help themselves extend its operational life. They should be able to locate their projector in an air conditioned room or at least in a well-ventilated area so that they’ll able to maintain and keep it normally and regularly functioning. Optimizing the brightness setting of a projector lamp will not extend its life.
They must avoid setting the brightness to excessive levels and as much as possible they should remember darkening their room so as to allow them to use lower brightness setting. As users of this projector lamp they have to be aware of the fact that every projector has an internal ventilation system that is driven by a cooling fan to maintain a good airflow and ensure that the internal temperature is as low as possible.
So regular users should have to consistently clean the air filter and change it when it becomes unserviceable or damaged so that they would be able to prolong the lifespan of its lamp. As part of a precaution, if users will use this projector on the go they need to make extra care for the lamp. The projector’s lamp is constructed of a sensitive filament that is extremely fragile and becomes very hot when in operation. So, moving it while it is turned-on may subject it to vibrations that will shorten its life or the worst thing that may happen is blowing it on the spot.
All users need a little more patience to wait for a few minutes after turning it off before storing the projector in the bag. Although the Epson EB-S7 has an instant off feature, practicing this precaution will ensure that the projector’s heat does not get trapped if you store it in a bag immediately after use as this will also shorten the lamp life.
People also viewed
- The Epson V13H010L68 ELPLP68 is manufactured by Epson and was added in December 2014 in the Video Projector Replacement Lamps section
- This product has a rating of 5.0 out of 5
- The best price of the Epson V13H010L68 ELPLP68 in Australia is $91.34 at Amazon Australia
- In Australia this product is available in Sydney, Melbourne, Brisbane
- You can find this product at Skycomp Technology, Amazon Australia, NanoByte Solutions